卡特零件查询（725C） 397-2858: TAILGATE AR
广数供应链运营团队, 14 02月, 2025，浏览：
248 次
| Pos. | Part No | Qty | Parts name | Comments |
|---|
| 1. | 3U-2837 | [2] | PAD-THRUST | |
| 2. | 5U-7151 | [2] | CAP-GREASE | |
| 4. | 154-6369B | [12] | SHIM(3-MM THK) | |
| 5. | 169-4040B | [4] | SHIM(2-MM THK) | |
| 6. | 233-1363 | [2] | PIVOT(TAILGATE) | |
| 7. | 257-7244 | [2] | LINK(LONG) | |
| 8. | 257-7245 | [1] | LINK(SHORT) | |
| 9. | 305-4173 | [18] | SPACER(17.5X38X25-MM THK) | |
| 10. | 337-0716B | [6] | SHIM(6-MM THK) | |
| 11. | 360-4699B | [4] | SHIM(1-MM THK) | |
| 12. | 452-7870 | [2] | PLATE | |
| 14. | 437-1866 | [2] | PIN | |
| 15. | 437-1907 | [2] | WASHER(27X130X12-MM THK) | |
| 16. | 526-1955 | [1] | TAILGATE GP | |
| | 8T-4139M | [4] | BOLT(M12X1.75X30-MM) | |
| | 8T-4223 | [4] | WASHER-HARD(13.5X25.5X3-MM THK) | |
| | 154-4812 | [2] | ABSORBER-SHOCK | |
| | 440-6390 | [1] | PLATE AS | |
| 17. | 526-2039 | [1] | ARM AS(RH) | |
| 17A. | 437-1865 | [2] | BUSHING-BEARING | |
| | 440-6670 | [1] | PLATE AS | |
| 18. | 526-2038 | [1] | ARM AS(LH) | |
| 18A. | 437-1865 | [2] | BUSHING-BEARING | |
| | 440-6678 | [1] | PLATE AS | |
| 19. | 489-0861 | [2] | CHAIN AS | |
| | | | (EACH INCLUDES) |
| | 3U-2838 | [27] | CHAIN | |
| 20. | 198-4780 | [8] | WASHER-HARD(17.5X32X8-MM THK) | |
| 21. | 3B-8489 | [2] | FITTING-GREASE(1/8-27 PTF) | |
| 22. | 6V-7676M | [6] | NUT(M24X3-THD) | |
| 23. | 7X-2489M | [4] | BOLT(M24X3X100-MM) | |
| 24. | 7X-2554M | [4] | BOLT(M16X2X70-MM) | |
| 25. | 7X-2556BM | [18] | BOLT(M16X2X100-MM) | |
| | | | (USE WHEN 15-MM TO 19-MM OF SHIMS ARE USED) |
| | | | -OR- |
| | 7X-2555BM | [18] | BOLT(M16X2X80-MM) | |
| | | | -OR- |
| | 8T-4175BM | [18] | BOLT(M16X2X90-MM) | |
| | | | (USE WHEN 5MM TO14MM OF SHIMS ARE REQUIRED) |
| 26. | 7X-2557BM | [8] | BOLT(M16X2X140-MM) | |
| | | | -OR- |
| | 7X-2558BM | [8] | BOLT(M16X2X150-MM) | |
| | | | (USE WHEN 2 OR 3 SHIMS ARE FITTED) |
| 28. | 7X-2579M | [2] | BOLT(M24X3X240-MM) | |
| 31. | 8T-4167 | [16] | WASHER-HARD(26X44X4-MM THK) | |
| 35. | 8T-4778M | [4] | LOCKNUT(M16X2-THD) | |
| 36. | 9X-8257 | [8] | WASHER(17.5X30X3.5-MM THK) | |
| | B | | USE AS REQUIRED |
| | M | | METRIC PART |
