纽荷兰零件查询(DC85) - CRAWLER DOZER (8/04-) (09-18) - CANOPY, ROPS - FRAME, MOUNTING AND GRAB HANDLES New Holland Constructuion

广数供应链运营团队, 15 02月, 2025,浏览: 560 次

格莳国际 工程机械 重卡 农机 汽配
Pos.Part NoQtyParts nameComments
1. 87352983 [1] ROPSBURFrame, ROPS Canopy; Replaces 87436977 Superseded by part number: 87550973
2. 87444743 [1] HANDLEBURGrab Handle, Left-Hand
3. 87444747 [1] HANDLEBURGrab Handle, Right-Hand
4. 627-10020 [4] BOLT,Hex, M10 x 1.5 x 20mm, Cl 10.9, Full ThdCAS Superseded by part number: 11106031
5. 895-11010 [4] WASHER,11mm ID x 20mm OD x 2mm ThkCAS Superseded by part number: 14496621
6. 86983061 [2-4] SUPPORT ASSY.BURRight-Hand; Includes (2) 79060730 Bushings; With Hole For Alignment Pin, Ref 7
. . 79060730 [2] BUSHINGLEC
7. 446640A1 [2] SPECIAL PINBURAlignment; Right-Hand Side Only; 50.2 mm long; No Longer Used, Order 87311743
7. 87311743 [2] SPECIAL PINBURAlignment; Right-Hand Side Only; 45.2 mm long
8. 76067987 [2] SUPPORTLECLeft-Hand; Includes (2) 79060730 Bushings; Without Hole For Alignment Pin, Ref 7; May Be Replaced With Ref 6 Support On Some Models
9. 79093830 [4] SCREW,Hex, M24 x 2 x 150mmLEC
10. 79093828 [4] PLATELEC
11. 79084966 [4] BUSHINGLEC
12. 79085441 [8] WASHER,24.6mm ID x 90mm OD x 5mm ThkLEC
13. 13398976 [4] SNAP RING,M40, IntJES
14. 864-10020 [4] HEX SOC SCREW,M10 x 20mm, Cl 8.8CAS Superseded by part number: 86632600
15. 140028 [4] WASHER,10.2mm ID x 18.1mm OD x 2.2mm ThkNH
16. 514-1211 [12] BOLT,Hex, M20 x 1.5 x 45mm, Cl 10.9CASM20 x 45; 10.9
17. 896-11020 [12] WASHER,22mm ID x 37mm OD x 4mm ThkCAS22 x 37 x 4 mm Superseded by part number: 86625260
18. 448838A1 [1] HANDLEBURGrab Handle, Front
22. 353-429 [4] PLUGCAS11/16 in Superseded by part number: 86625134
Growshine-Ailin
Growshine-Ailin

Growshine International

WhatsApp me    

Mobile/WeChat:+86 18929544937
Mail:cherylzhang@www.growshine.com.cn

微信 微信
WhatsApp WhatsApp

热门推荐

热门资讯