卡特零件查询（AP355F） 444-5441: CANOPY GP
广数供应链运营团队, 17 02月, 2025，浏览：
457 次
| Pos. | Part No | Qty | Parts name | Comments |
|---|
| 1. | 5P-7958 | [2] | SLEEVE-CABLE SPLICE | |
| 2. | 086-0507 | [1] | PIN | |
| 3. | 269-0194 | [1] | FILM-WARNING(CRUSH HAZARD, STAY BACK, U.S.) | |
| 4. | 303-3427 | [1] | FILM-IDENTIFICATION(CAT) | |
| 5. | 362-8121I | [2] | HOSE AS | |
| 6. | 422-3788Y | [1] | CANOPY GP | |
| 7. | 523-5161 | [4] | BLOCK | |
| 8. | 443-6854 | [1] | PIN AS | |
| | 9X-8257 | [1] | WASHER(17.5X30X3.5-MM THK) | |
| 9. | 443-6855 | [4] | SPACER(7X10X15-MM THK) | |
| 10. | 448-3798 | [1] | CYLINDER GP-HYDRAULIC | |
| | 4J-5477 | [2] | SEAL-O-RING | |
| | 200-4635 | [2] | ELBOW | |
| | 453-8819J | [1] | CYLINDER AS-HYDRAULIC | |
| 11. | 453-8822 | [1] | SUPPORT AS | |
| 12. | 453-8823 | [2] | SUPPORT | |
| 13. | 453-8829 | [1] | CORD | |
| 14. | 516-2000 | [1] | FLOOR AS | |
| | 8T-3490M | [3] | NUT-WELD(M10X1.5-THD) | |
| | 8T-8874M | [6] | NUT-WELD(M5X0.8-THD) | |
| 15. | 453-8901Y | [1] | WIRING GP-CANOPY(RISER) | |
| 16. | 453-8902 | [1] | PUMP GP-HAND(CANOPY) | |
| | 128-4120 | [1] | PUMP AS-HAND | |
| | 148-8320 | [2] | CONNECTOR AS | |
| | | | (EACH INCLUDES) |
| | 8C-6865 | [1] | CONNECTOR | |
| | 4J-5477 | [1] | SEAL-O-RING | |
| 17. | 469-2232 | [1] | PLATE-SUPPORT | |
| 18. | 095-1270M | [8] | SETSCREW-SOCKET(M12X1.75X30-MM) | |
| 19. | 167-1192 | [2] | CLIP | |
| 20. | 344-5674M | [6] | NUT(M8X1.25-THD) | |
| 21. | 5P-4116 | [8] | WASHER-HARD(8.8X20.5X2-MM THK) | |
| 22. | 5P-7957 | [2] | LANYARD | |
| 23. | 6V-7688M | [2] | LOCKNUT(M20X2.5-THD) | |
| 24. | 6V-7743M | [10] | LOCKNUT(M6X1-THD) | |
| 25. | 6V-9167M | [2] | BOLT(M20X2.5X140-MM) | |
| 26. | 7I-2272M | [2] | BOLT(M5X0.8X12-MM) | |
| 27. | 7X-0515 | [6] | WASHER-HARD(17X35X5-MM THK) | |
| 28. | 7X-7729 | [4] | WASHER(11X25X3-MM THK) | |
| 29. | 8C-6802M | [4] | SCREW-FLAT HEAD(M6X1X3.72-MM) | |
| 30. | 8T-0328 | [2] | WASHER-HARD(5.5X10X1-MM THK) | |
| 31. | 8T-4122 | [10] | WASHER-HARD(17X32X3.5-MM THK) | |
| 32. | 8T-4123 | [4] | WASHER(22X35X3.5-MM THK) | |
| 33. | 8T-4132M | [7] | NUT(M16X2-THD) | |
| 34. | 8T-4140M | [6] | BOLT(M16X2X60-MM) | |
| 35. | 8T-4171M | [1] | BOLT(M6X1X12-MM) | |
| 36. | 8T-4189M | [2] | BOLT(M8X1.25X20-MM) | |
| 37. | 8T-4195M | [3] | BOLT(M10X1.5X30-MM) | |
| 38. | 8T-4223 | [2] | WASHER-HARD(13.5X25.5X3-MM THK) | |
| 39. | 8T-4244M | [8] | NUT(M12X1.75-THD) | |
| 40. | 8T-4779M | [5] | BOLT(M16X2X35-MM) | |
| 41. | 8T-5001M | [1] | BOLT(M12X1.75X130-MM) | |
| 42. | 8T-8549M | [1] | LOCKNUT(M12X1.75-THD) | |
| 43. | 9X-6155M | [6] | BOLT-SOCKET HEAD(M6X1X16.7-MM) | |
| 44. | 9X-8256 | [11] | WASHER(6.6X12X2-MM THK) | |
| 45. | 8T-4186M | [1] | BOLT(M10X1.5X40-MM) | |
| 46. | 501-0566 | [1] | FILM-IDENTIFICATION(LOWER) | |
| 47. | 081-3772 | [1] | LEVER | |
| 48. | 156-6175 | [2] | CLIP(LADDER) | |
| 49. | 8T-4908M | [4] | BOLT(M8X1.25X25-MM) | |
| 50. | 516-0334 | [1] | PLATE | |
| 51. | 8T-4200M | [2] | BOLT(M8X1.25X16-MM) | |
| 52. | 8T-4224 | [6] | WASHER-HARD(8.8X16X2-MM THK) | |
| | | | |
| | | | AVAILABLE REPAIR KIT(S): |
| | 495-1484J | [1] | KIT-SEAL | |
| | | | (INCLUDES SEAL-O-RINGS & SEALS) |
| | I | | REFER TO HYDRAULIC INFORMATION SYSTEM |
| | J | | KIT MARKED J SERVICES PART(S) MARKED J |
| | M | | METRIC PART |
| | Y | | SEPARATE ILLUSTRATION |
