格莳国际Growshine：恒天九五 JV365LC 履带式液压挖掘机参数配置
广数供应链运营团队, 26 01月, 2025，浏览：
413 次
| 发动机（柴油发动机）Engine (diesel engine) | | 回转系统Rotation system |
| 型号Model | 康明斯6CTAA8.3cummins 6CTAA8.3 | 制动器Brake | 液压制动，手柄处于中位时自动制动Hydraulic brake automatically working when the handle is in the middle position |
| 型式Type | 4冲程、6气缸、水冷、直喷式排气涡轮增压装置（含中冷）4 stroke, 6 cylinders, water cooled, direct injection turbo charging(intercooled) | 停车制动器Parking brake | 液压盘式制动器Hydraulic disc brakes |
| 回转速度Rotation speed | 10 rpm |
| 回转后端半径Back swing radius | 3370 |
| 前部最小回转半径Front Minimum swing radius | 4415 |
| 内径×冲程Internal diameter Stroke | 114×134.9 mm | 行走系统Travel system |
| 排气量Emission | 8.29 L | 行走马达Traction Motor | 两档变速柱塞式马达Two variable speed piston motor |
| 额定输出/转速Rated output/Speed | 198KW / 2000rmp | 制动器Brake | 液压盘式制动器Hydraulic disc brake |
| 最大扭矩Maximum torque | 1158Nm / 1500rmp | 履带Track | 48块每侧48 pieces each side |
| 液压装置Hydraulic system | 履带板宽度Track pad width | 600 |
| 液压油泵Hydraulic pump | 行走速度Walking speed | 5.4/3.2 km/h |
| 型式Type | 轴向柱塞变量泵2个+齿轮泵1个2 variable piston pump+1 gear pump | | |
| 爬坡能力Grade ability | 70%（35°） |
| 铲斗装置（标准）Bucket capacity |
| 最大排量Maximum emission | 2×360L/min,1×30L/min | 标准挖斗容量Standard bucket capacity | 1.6 m3 |
| 先导控制泵Pilot control pump | 挖斗宽度或切面Bucket width or section | 1580 mm |
| 型式Type | 齿轮式Gear | 斗齿数Bucket teeth | 5 |
| 控制阀Control valve | 挖斗重量Bucket weight | 1574 kg |
| 型式Type | 滑阀式×8联1个Slide valve 8/pieces | 挖掘力Digging force |
| 液压油冷却器Hydraulic oil cooler | 铲斗挖掘力Bucket digging force | 225 kN |
| 型式Type | 风冷式Air-cooled | 斗杆挖掘力Digging arm digging force | 186 kN |
| 最大压力Maximum pressure | 操作重量与接地压Operation weight and ground pressure |
| 动臂、斗杆、铲斗Boom, stick, bucket | 32.5 Mpa | 地面接触压强Ground contact pressure | 59kPa |
| 行走回路Walking Loop | 32.5 Mpa | 操作重量Operation weight | 34900 kg |
| 回转回路Rotation loop | 26 Mpa | 油箱容量Tank capacity |
| 控制回路Control loop | 3.9 Mpa | 燃油箱Fuel tank | 680 L |
| 增压状态Pressurized | 34.3 Mpa | 液压油箱Hydraulic tank | 380L |
| JV365LC 整机尺寸Dimension (mm) |
| A | 总长度（运输时）Length (transportation) | 11210 |
| B | 总高度（运输时）Height (transportation) | 3580 |
| C | 总宽度Width (transportation) | 3190 |
| D | 驾驶室高度 | 3180 |
| E | 平台离地间隙Platform ground clearance | 1255 |
| F | 最小离地间隙 Minimum ground clearance | 545 |
| G | 尾部回转半径Rear swing radius | 3370 |
| H | 履带接地长度Track ground length | 4040 |
| I | 履带总长度 | 4955 |
| J | 轨距Track gauge | 2590 |
| K | 履带板宽度Track pad width | 600 |
| L | 上部宽度Upper width | 2980 |
| JV365LC 作业范围Working dimension (mm) |
| a | 最大挖掘半径Maximum digging radius | 10715 |
| b | 停机面最大挖掘半径 Maximum digging radius (face down) | 10495 |
| c | 最大挖掘深度Maximum digging depth | 6915 |
| d | 最大挖掘高度Maximum digging height | 10035 |
| e | 最大卸载高度Maximum unloading height | 7185 |
| f | 最大垂直挖掘深度 Maximum digging depth of vertical arm | 6260 |
| g | 前部最小回转半径 Front minimum swing radius | 4415 |
