纽荷兰零件查询(D150B) - CRAWLER DOZER TIER 3 (HYDRO) (10/07-) (08-08) - HYDRAULICS - RIPPER, VALVE TO REAR OF TRACTOR New Holland Constructuion

广数供应链运营团队, 14 02月, 2025,浏览: 146 次

格莳国际 工程机械 重卡 农机 汽配
Pos.Part NoQtyParts nameComments
1. 87658573 [1] CONTROL VALVEBURFour Spool Control Valve; See Figure 08-18
2. 201-128 [2] HYD CONNECTOR,13/16"-16 ORFS x 1 1/16"-12 ORBCASIncl. 3, 4
3. 237-6012 [2] O-RING,0.116" Thk x 0.924" ID, -912, Cl 6, 90 DuroCASBoss End Superseded by part number: 72186120, 167266, 79051113
4. 238-6014 [2] O-RING,0.07" Thk x 0.489" ID, -14, Cl 6, 90 DuroCASFace Seal End Superseded by part number: 9992298
5. 87578208 [1] HOSE ASSY.BURHose Assy, Ripper; Lower Port at Valve / Upper at Bulkhead Tee
5A. 87578210 [1] HOSE ASSY.BURHose Assy, Ripper; Upper Port at Valve / Lower at Bulkhead Tee
6. 85802820 [1] CHECK VALVEIMOPilot Operated, Single Acting
7. 201-101 [4] HYD CONNECTOR,11/16"-16 ORFS x 9/16"-18 ORBCASIncl Ref 7A, 7B Superseded by part number: 9993143
7A. 237-6006 [1] O-RING,0.078" Thk x 0.468" ID, -906, Cl 6, 90 DuroCASBoss End Superseded by part number: 9617873
7B. 238-6012 [1] O-RING,0.07" Thk x 0.364" ID, -12, Cl 6, 90 DuroCASFace Seal End Superseded by part number: 9993141
8. L302731 [1] CLAMPCASCLAMP
9. 614-12045 [1] BOLT,Hex, M12 x 1.75 x 45mm, Cl 8.8, Full ThdCASIf Used Superseded by part number: 9628065
10. 896-11012 [1] WASHER,13.5mm ID x 24mm OD x 3mm ThkCASIf Used Superseded by part number: 86625255
11. 412126 [1] NUT,M12 x 1.75ZEDIf Used
12. 895-11008 [4] WASHER,M8 x 16 x 1.6CAS Superseded by part number: 86624184
13. 43130 [2] BOLT,Hex, M8 x 1.25 x 50mm, Cl 8.8NH
14. 829-1408 [2] NUT,Hex, M8 x 1.25, Cl 10.9CAS Superseded by part number: 43362, 87778059
15. 87676109 [2] HOSE ASSY.BURHose Assy, Ripper
Growshine-Ailin
Growshine-Ailin

Growshine International

WhatsApp me    

Mobile/WeChat:+86 18929544937
Mail:cherylzhang@www.growshine.com.cn

微信 微信
WhatsApp WhatsApp

热门推荐

热门资讯