卡特零件查询（AP-1055F） 416-2003: CONTROL GP-GRADE & SLOPE
广数供应链运营团队, 16 02月, 2025，浏览：
909 次
| Pos. | Part No | Qty | Parts name | Comments |
|---|
| 1. | 8T-8737 | [12] | PLUG-SEAL | |
| 2. | 132-8487 | [4] | NUT-RING | |
| 3. | 446-6629 | [1] | PLATE AS | |
| | 8T-3490M | [1] | NUT-WELD(M10X1.5-THD) | |
| 4. | 289-9632 | [2] | RECEPTACLE AS | |
| 5. | 332-6701 | [4] | CAP AS-PROTECTION | |
| 6. | 340-7160 | [1] | CONVERTER-POWER(24-VOLT TO 12-VOLT) | |
| 7. | 351-4477 | [1] | CASE-CARRYING | |
| 8. | 371-6464 | [2] | FILM-IDENTIFICATION(GRADE CONTROL) | |
| 9. | 463-8518Y | [1] | HARNESS AS-CONTROL(GRADE, SLOPE)(LH) | |
| 9A. | 463-8518Y | [1] | HARNESS AS-CONTROL(GRADE, SLOPE)(RH) | |
| 11. | 443-3733 | [2] | MOUNT AS | |
| | | | (EACH INCLUDES) |
| | 355-8941M | [4] | NUT-WELD(M16X2-THD) | |
| 12. | 449-2017 | [1] | CONTROL-ELECTRONIC | |
| 13. | 525-4958 | [2] | MOUNT AS | |
| 14. | 446-6630 | [1] | PLATE AS | |
| | 8T-3490M | [1] | NUT-WELD(M10X1.5-THD) | |
| 15. | 459-2971Y | [1] | HARNESS AS-CONTROL(GRADE, SLOPE) | |
| 16. | 103-6262 | [16] | SCREW-MACHINE(4-40X0.63-IN) | |
| 17. | 198-4775 | [4] | WASHER-HARD(6.6X15X6-MM THK) | |
| 18. | 344-5673M | [4] | NUT(M6X1-THD) | |
| 19. | 102-8801 | [1] | KIT-RECEPTACLE(12-PIN) | |
| | | | (INCLUDES RECEPTACLE AS & WEDGE) |
| 20. | 4B-4863 | [2] | WASHER(4.7X11X1.2-MM THK) | |
| 21. | 4D-7388 | [2] | CLIP(LOOP) | |
| 22. | 7K-1181 | [3] | STRAP-CABLE | |
| 23. | 7X-7729 | [2] | WASHER(11X25X3-MM THK) | |
| 24. | 8T-4121 | [12] | WASHER-HARD(11X21X2.5-MM THK) | |
| 25. | 8T-4136M | [8] | BOLT(M10X1.5X25-MM) | |
| 26. | 8T-4137M | [4] | BOLT(M10X1.5X20-MM) | |
| 27. | 8T-4191M | [2] | BOLT(M10X1.5X16-MM) | |
| 28. | 8T-4223 | [8] | WASHER-HARD(13.5X25.5X3-MM THK) | |
| 29. | 8T-4647M | [2] | SCREW-MACHINE(M4X0.7X20-MM) | |
| 30. | 8T-4956M | [8] | BOLT(M12X1.75X35-MM) | |
| 31. | 477-6212 | [1] | HARNESS AS-CONTROL(LH) | |
| 31A. | 477-6212 | [1] | HARNESS AS-CONTROL(RH) | |
| 32. | 561-3952 | [2] | CLAMP AS | |
| | | | |
| | 450-9552FY | [1] | ELECTRONICS GP-MACHINE | |
| | F | | NOT SHOWN |
| | M | | METRIC PART |
| | Y | | SEPARATE ILLUSTRATION |
